RDX AWD L4-2.3L Turbo (2010)
release the hook (C) from the side bracket (D). Repeat this step on the opposite side.
4. With the help of an assistant, pull out the rear bumper (A) to release the hooks (B) from the upper bracket (C).
5. Remove the hooks (A), then remove the rear bumper absorber (B) from the rear bumper beam (C).
6. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the rear bumper engages the hooks (of both the side bracket and side spacers) on each side securely.
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips and hooks into place securely.
