RDX AWD L4-2.3L Turbo (2010)
Rear Bumper: Overhaul
Rear Bumper Disassembly/Reassembly
NOTE:
-
Take care not to scratch the rear bumper faces.
-
Put on gloves to protect your hands.
1. Remove the rear bumper. See: Removal and Replacement
2. Remove the clips and detach the hooks (A), then separate the left rear bumper face (B), the right rear bumper face (C), and the lower rear bumper
face (D).
3. Reassemble the rear bumper in the reverse order of disassembly, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips and hooks into place securely.
