RDX AWD L4-2.3L Turbo (2010)
-
The latch cable (A) should be fixed to the cable fastener (B) with the latch in lock position as shown.
-
Make sure each connector is plugged in properly, and the cables are connected securely.
-
Make sure the power window, the power door lock, the power mirror, and the seat memory operates properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.
-
Do the power window control unit resetting procedure See: Relays and Modules/Relays and Modules - Windows and Glass/Power Window
Control Module/Testing and Inspection.
-
Push the clip and the hooks into place securely.
