RDX AWD L4-2.3L Turbo (2010)
Rear Door Panel: Service and Repair
Rear Door Panel Removal/Installation
Rear Door Panel Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
-
Trim Pad Remover Snap-on A 177A or equivalent, commercially available
*Available through the Acura Tool and Equipment Program; 888-424-6857
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Take care not to scratch the door or the related parts.
1. Raise the glass fully.
2. Pry out on the lower portion of the inner handle cap (A) with the appropriate trim tool to release the hooks (B, C).
3. Remove the screws (A, B) from the inner handle (C).
4. Remove the screw.