RDX AWD L4-2.3L Turbo (2010)
Rear Door Weatherstrip: Service and Repair
Rear Door Wheel Arch Seal Replacement
Rear Door Wheel Arch Seal Replacement
NOTE:
-
When removing components, use the trim tools or equivalent.
-
Take care not to scratch the body.
-
Put on gloves to protect your hands.
1. Remove the screws securing the rear door wheel arch seal (A). Pull the rear door wheel arch seal up and pull it out to release the hooks (B) from
the rear door (C).
2. If necessary, separate the rear door wheel arch seal (A) and the rear door wheel arch seal bracket (B) by pulling the seal from the bracket.
3. Install the rear door wheel arch seal in the reverse order of removal.