RDX AWD L4-2.3L Turbo (2010)
Hood Latch Release: Service and Repair
Hood Release Handle Replacement
Hood Release Handle Replacement
1. Remove the kick panel See: Interior Moulding / Trim/Scuff Plate/Service and Repair.
2. Remove the bolts, then remove the hood release handle (A) from the body.
3. Disconnect the hood opener cable (B) from the hood release handle. Take care not to kink the cable.
4. Install the hood release handle in the reverse order of removal, and note these items:
-
Make sure the hood opener cable is connected properly.
-
Make sure the hood opens properly.
