RDX AWD L4-2.3L Turbo (2010)
Glove Compartment Lock: Service and Repair
Glove Box Striker Replacement
NOTE: Take care not to scratch the dashboard or the related parts.
1. Disconnect the glove box damper from the pivot on the glove box. While holding the glove box, release the glove box stop on each side from the
dashboard by pushing them in, then remove the glove box See: Service and Repair/Glove Box Removal/Installation.
2. Remove the screws, then remove the glove box striker (A).
3. Install the striker in the reverse order of removal.