RDX AWD L4-2.3L Turbo (2010)
-
Any cracks or stress-whitened areas in the clip seating surfaces (F)
-
Replace any damaged parts with new ones.
-
Make sure the top of the trim overlaps with the headliner correctly See: Restraint Systems/Air Bag Systems/Service and Repair.
-
Make sure the pin (G) on the front seat belt shoulder anchor adjuster (H) and the hole (I) on the back of the slider are engaged when installing
the B-pillar upper trim.
-
Make sure the upper trim hook is installed into the side curtain airbag B-pillar bracket securely.
-
Push the clips and the hooks into place securely.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.