RDX AWD L4-2.3L Turbo (2010)
Power Seat Motor: Testing and Inspection
Power Lumbar Support Motor Test
Power Lumbar Support Motor Test
1. Remove the driver's seat See: Service and Repair/Front Seat Removal/Installation.
2. Remove the seat-back cover See: Seat Cover/Service and Repair/Front Seat-back Cover/Pad Replacement.
3. Disconnect the 2P connector (A) from the lumbar support motor.
4. Test each motor by applying battery voltage and body ground to the terminals.
5. If the motor does not run or fails to run smoothly, replace it See: Service and Repair/Front Seat Frame Replacement - Driver's Seat.
