RDX AWD L4-2.3L Turbo (2010)
1. Remove some brake fluid from the master cylinder.
2. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
3. Remove the rear wheels.
4. Remove the flange bolts (A) while holding the respective caliper pins (B) with a wrench. Be careful not to damage the pin boots, and remove the
caliper body (C). Check the hose and the pin boots for damage and deterioration.
5. Remove the outer pad (A) and the outer pad shim (B).
6. Remove the inner pad (A) from the caliper.