RDX AWD L4-2.3L Turbo (2010)
11. Remove the brake booster upward from the engine compartment.
NOTE:
-
Use new brake booster gasket (B) during reassembly.
-
Be careful not to damage the booster surfaces and the threads of the booster studs.
-
Be careful not to bend or damage the brake lines.
12. Install the brake booster in the reverse order of removal, and note these items:
-
Adjust the pushrod length before installing the brake booster See: Adjustments.
-
Install the master cylinder after installing the brake booster See: Hydraulic System/Brake Master Cylinder/Service and Repair.
-
Check the brake pedal height and free play after installing the master cylinder, and adjust it if necessary See: Brake Pedal Assy/Adjustments.
-
Bleed the brake system See: Brake Bleeding/Service and Repair.
