RDX AWD L4-2.3L Turbo (2010)
Vacuum Pump: Service and Repair
Electric Vacuum Pump Replacement
1. Disconnect the electric vacuum pump 2P connector (A).
2. Disconnect the vacuum hose (B) from the electric vacuum pump (C).
3. Remove the electric vacuum pump from the pump bracket (D).
NOTE: Do not disassemble the electric vacuum pump.
4. Inspect the pump bracket, and replace if necessary.
5. Install the electric vacuum pump in the reverse order of removal.
6. Start the engine, and check that the electric vacuum pump system indicator goes off See: Testing and Inspection/Initial Inspection and Diagnostic
Overview.