RDX AWD L4-2.3L Turbo (2010)
Steering Angle Sensor: Service and Repair
Steering Angle Sensor Replacement
NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.
1. With the wheels in the straight-ahead position and the steering wheel centered, remove the steering wheel See: Steering and
Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering Wheel Removal.
2. Remove the steering column covers See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column
Removal/Installation.
3. Disconnect the combination light switch 12P connector (A) and the steering angle sensor 5P connector (B) from the combination switch
assembly/cable reel (C).
4. Disconnect the dashboard wire harness 20P connector (A), then remove the dashboard wire harness from the harness holder (B).