RDX AWD L4-2.3L Turbo (2010)
5. Disconnect the wiper/washer switch 8P connector (A), then remove the dashboard wire harness from the harness holder (B).
6. Remove the harness clip (C), then disconnect the dashboard wire harness 4P connector (D) from the cable reel 4P connector (E).
7. Remove the combination switch assembly/cable reel mounting screws (A), then remove the combination switch assembly/cable reel (B) from the
steering column.
8. Remove the cable reel See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair.
9. Remove the combination light switch (A) and the wiper/washer switch (B) from the combination switch body assembly (C).
