RDX AWD L4-2.3L Turbo (2010)
10. Install the combination switch body assembly in the reverse order of removal, and note these items:
-
Do not remove the steering angle sensor from the combination switch body.
-
When installing the cable reel, set the turn signal canceling sleeve position so that the arrow points straight up.
-
Note that the tightening order is specified for the combination switch assembly/cable reel mounting screws See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Steering Column Removal/Installation.
-
Do the steering angle sensor center point writing See: Antilock Brakes / Traction Control Systems/Testing and Inspection/Programming and
Relearning.