RDX AWD L4-2.3L Turbo (2010)
Traction Control Switch: Testing and Inspection
VSA Off Switch Test
1. Turn the ignition switch to LOCK (0).
2. Remove the VSA OFF switch (A) from the switch panel.
3. Disconnect the VSA OFF switch 5P connector (B).
4. On the switch side, check for continuity between VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the
button is pressed, and no continuity when the button is released.
5. Check for continuity between VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.