RDX AWD L4-2.3L Turbo (2010)
Thermostat: Service and Repair
Water Outlet Removal/Installation
Water Outlet Removal and Installation
Removal
1. Drain the engine coolant See: Coolant/Service and Repair.
2. Remove the air cleaner See: Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair.
3. Remove the charge air cooler See: Powertrain Management/Fuel Delivery and Air Induction/Turbocharger/Intercooler/Service and Repair.
4. Remove the air bypass outlet pipe (A).
5. Remove the ignition coil cover (A) and the fuel feed pipe mounting bolt (B).
6. Disconnect the engine wire harness connectors, and remove the wire harness clamps from the cylinder head.
-
CMP sensor A (Intake) connector
-
CMP sensor B (Exhaust) connector
-
EVAP canister purge valve connector
7. Remove the harness holder from the bracket.
