RDX AWD L4-2.3L Turbo (2010)
19. Tighten the bearing cap bolts an additional 67 °.
20. Torque the 8 mm bolts, in sequence, to 22 Nm (2.2 kg-m, 16 lb-ft).
21. Clean the excess liquid gasket off the engine block.
22. Apply a light coat of new engine oil to the lip of the crankshaft oil seal.
23. Use the driver handle, 15 x 135L and the oil seal driver attachment, 96 mm, drive in the new crankshaft oil seal squarely into the engine block to
the specified installed height.