RDX AWD L4-2.3L Turbo (2010)
Oil Filter Adapter: Service and Repair
Engine Oil Filter Feed Pipe Replacement
Engine Oil Filter Feed Pipe Replacement
1. Remove the oil filter base See: Engine Oil Filter Base Replacement.
2. Remove the oil filter feed pipe.
3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
4. Tighten the oil filter feed pipe to 35 Nm (3.6kg-m, 26 lb-ft), then remove the nuts from the oil filter feed pipe.
NOTE: Apply engine oil to the oil filter feed pipe.
5. Install the oil filter base See: Engine Oil Filter Base Replacement.
