RDX AWD L4-2.3L Turbo (2010)
7. Apply new engine oil to the threads of the cam chain tensioner mounting bolt.
8. Install the cam chain guide A and tensioner arm (B).
9. Compress the auto-tensioner when replacing the cam chain. Remove the pin from the auto-tensioner. Turn the plate (A) counterclockwise, to
release the lock, then press the rod (B), and set the first cam (C) to the edge of the rack (D). Insert the 1.2 mm (0.05 in) diameter pin or lock pin
(P/N 14511-PNA-003) (E) into the holes.
NOTE: If the chain tensioner is not set up as described, the tensioner will become damaged.
