RDX AWD L4-2.3L Turbo (2010)
33. Lower the vehicle on the lift.
34. Install the air cleaner housing assembly See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair.
35. Install the upper torque rod (A) and torque rod stiffener (B), and tighten the new stiffener mounting bolts (C), then tighten the new upper torque
rod mounting bolts in the numbered sequence shown.
36. Install the crankshaft pulley See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair.
37. Install the variable valve timing control (VTC) oil control solenoid valve See: Variable Valve Timing/Variable Valve Timing Actuator/Service
and Repair/VTC Oil Control Solenoid Valve Removal/Test/Installation.
38. Install the cylinder head cover See: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover Installation.
39. Install the drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.
40. Install the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
41. Install the front wheels.