RDX AWD L4-2.3L Turbo (2010)
6. Check for continuity between the A/C compressor clutch connector terminals No. 1 and No. 2. If there is no continuity, replace the thermal
protector See: Thermal Limiting Fuse/Service and Repair.
NOTE: The thermal protector will have no continuity above about 252 to 262 °F (122 to 128 °C). When the temperature drops below about 241 to 219 °
F (116 to 104 °C), the thermal protector will have continuity.
7. Disconnect the field coil connector (A). Check resistance of the field coil. If resistance is not within specifications, replace the field coil See:
Service and Repair.
