RDX AWD L4-2.3L Turbo (2010)
Vanity Lamp: Service and Repair
Vanity Mirror Light Test/Replacement
1. Remove the sunvisor See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair.
2. Disconnect the 2P connector (A) from the sunvisor (B).
3. Check for continuity between terminals No. 1 and No. 2 with the sunvisor fully retracted.
-
With the vanity mirror cover (C) opened, there should be continuity.
-
With the vanity mirror cover closed, there should be no continuity.
4. If the continuity is not as specified, go to step 5.
5. Carefully pry off the lens (A) with a small screwdriver.
