RDX AWD L4-2.3L Turbo (2010)
6. Remove the two screws, then remove the vanity mirror light (B).
7. Disconnect the two terminals (C) from the vanity mirror light.
8. Check for continuity between the terminals.
-
There should continuity between the terminals with the vanity mirror cover opened.
-
There should be no continuity between the terminals with the vanity mirror cover closed.
9. If the continuity is not as specified, check the bulb (D). If the bulb is OK, replace the vanity mirror light. If the vanity mirror light is OK, replace
the sunvisor See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair.
10. Install the vanity mirror light in the reverse order of removal.