RDX AWD L4-2.3L Turbo (2010)
7. Turn the ignition switch to LOCK (0).
8. Disconnect climate control unit connector A (24P).
9. Measure the evaporator temperature sensor resistance between climate control unit connector A (24P) terminals No. 13 and No. 18.
Is the resistance less than 24 kOhms?
YES -
Go to step 11.
NO -
Test the evaporator temperature sensor See: Heating and Air Conditioning/Testing and Inspection/Component Tests and General
Diagnostics/Evaporator Temperature Sensor Test.
10. Turn the ignition switch to LOCK (0), then disconnect climate control unit connector A (24P).
11. Turn the ignition switch to ON (II).
12. Measure the voltage between climate control unit connector A (24P) terminal No. 17 and body ground.
Is there battery voltage?
YES -
Go to step 13.