acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Accelerator Pedal Position Sensor > < A/C Signal|Engine|Page 2000
Page 3
background image

NO -

Repair an open in the wire between the climate control unit and the MICU. 

13. Turn the ignition switch to LOCK (0).

14. Reconnect climate control unit connector A (24P).

15. Set the A/C button and fan control switch to ON, then turn the ignition switch to ON (II).

16. Measure the voltage between climate control unit connector A (24P) terminal No. 17 and body ground.

Is there 0.5 V or less?

YES -

Replace the under-dash fuse/relay box  See: Maintenance/Fuses and Circuit Breakers/Relay Box/Service and Repair/Under-Dash Fuse/Relay Box
Removal/Installation. 

NO -

Check for loose wires or poor connections at the climate control unit connector A (24P). If the connections are good, substitute a known-good climate
control unit, and recheck. If the symptom/indication goes away, replace the original climate control unit  See: Heating and Air Conditioning/Control
Assembly/Service and Repair/Climate Control Unit Removal/Installation. 

Accelerator Pedal Position Sensor > < A/C Signal|Engine|Page 2000