RDX AWD L4-2.3L Turbo (2010)
64. Test PGM-FI main relay 1 See: Power and Ground Distribution/Testing and Inspection.
Is PGM-FI main relay 1 OK?
YES -
Go to step 65.
NO -
Replace PGM-FI main relay 1.
65. Jump the SCS line with the HDS.
66. Disconnect PCM connector B (44P).
67. Check for continuity between body ground and PCM connector terminals B1, B36, C2, C40, and C44 individually.
Is there continuity?
YES -
Go to step 68.
NO -
Repair an open in the wire between the PCM (B1, B36, C2, C40, C44) and G101 See: Locations.
68. Check for continuity between PCM connector terminal C13 and body ground.
