RDX AWD L4-2.3L Turbo (2010)
Is there continuity?
YES -
Go to step 69.
NO -
Go to step 70.
69. Continue to check for continuity between PCM connector terminal C13 and body ground, while disconnecting these connectors, one at a time:
-
MAP sensor 3P connector
-
Input shaft (mainshaft) speed sensor 3P connector
Does continuity go away when one of the above parts is disconnected?
YES -
Replace the part that caused an open when it was disconnected.
NO -
Repair a short in the wire between the PCM(C13) and the MAP sensor or the input shaft (mainshaft) speed sensor.
70. Check for continuity between PCM connector terminal B18 and body ground.