RDX AWD L4-2.3L Turbo (2010)
this procedure.
16. USA, Canada models: If the READ DATA (engine oil life) failed in step 7, go to step 19. Otherwise, go to step 17.
17. USA, Canada models: Select the PGM-FI system with the HDS.
18. USA, Canada models: Select the REPLACE PCM MENU, then select WRITE DATA, and follow the screen prompts.
NOTE: If the WRITE DATA indicates FAILED, continue with this procedure.
19. Select IMMOBI system with the HDS.
20. Enter the immobilizer PCM code that you got from the iN, and use the PCM replacement procedure in the HDS; it allows you to start the engine.
21. USA, Canada models: If the TP POSITION CHECK failed in step 6, clean the throttle body See: Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Procedures, then go to step 22.
22. USA, Canada models: If the READ DATA failed in step 7 or the WRITE DATA failed in step 18, replace the engine oil See: Engine, Cooling
and Exhaust/Engine/Engine Lubrication/Engine Oil/Service and Repair and engine oil filter See: Engine, Cooling and Exhaust/Engine/Engine
Lubrication/Oil Filter/Service and Repair, then go to step 23.
23. Select PGM-FI system and reset the PCM with the HDS.
24. Update the PCM if it does not have the latest software See: Computers and Control Systems/Testing and Inspection/Programming and
Relearning/PCM Update.
25. Do the PCM idle learn procedure See: Computers and Control Systems/Testing and Inspection/Programming and Relearning/PCM Idle Learn
Procedure.
26. Do the CKP pattern learn procedure See: Computers and Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview.