RDX AWD L4-2.3L Turbo (2010)
9. Jump the SCS line with the HDS.
10. Disconnect PCM connectors A, B, and C.
NOTE: PCM connectors A, B, and C have symbols (A=Square, B=Triangle, C=Circle) embossed on them for identification.
11. Remove the bolts (D), and remove the PCM assembly (E).
12. Remove the cover (A), and the bracket (B) from the PCM (C).
13. Install the parts in the reverse order of removal.
14. Turn the ignition switch to ON (II).
15. Manually input the VIN to the PCM with the HDS.
NOTE: DTC P0630 VIN Not Programmed or Mismatch may be stored because the VIN has not been programmed into the PCM; ignore it, and continue
