RDX AWD L4-2.3L Turbo (2010)
2. Place the driver's airbag (B) in the steering wheel, and secure it with new TORX bolts (C), using a TORX T30 bit.
NOTE: Make sure the clearance (D) between the steering wheel and horn pad is the specified value.
3. Connect the cable reel 4P connector (A) to the driver's airbag 4P connector, then install the access panel (B) on the steering wheel.
4. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
5. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.