RDX AWD L4-2.3L Turbo (2010)
8. Remove the retractor mounting nut (A) and the retractor nut (B), then remove the center seat belt (C) and retractor (D) from the seat-back frame
(E).
9. Install the seat belt and buckles in the reverse order of removal, and note these items:
-
Apply medium strength liquid thread lock to the center anchor bolts before reinstallation.
-
Tighten the bolts by hand first, then tighten to the specified torque.
-
Check that the retractor locking mechanism functions See: Testing and Inspection.
-
Assemble the washers on the center anchor bolt as shown.
-
Before installing the center anchor bolt, make sure there are no twists or kinks in the center belt.
-
Make sure the rear center emergency locking retractor (ELR) is pointing straight forward.
-
When installing the rear seat cushion, make sure the seat belt buckles comes out from the space of the cushions.
