RDX AWD L4-2.3L Turbo (2010)
Control Arm: Service and Repair
Rear Lower Arm B Removal/Installation
Rear Lower Arm B Removal and Installation
Removal
1. Raise and support the vehicle See: Wheels and Tires/Vehicle Lifting/Service and Repair.
2. Remove the rear wheel.
3. Position a floor jack at the connecting point of lower arm B and the lower damper mount.
4. Disconnect the stabilizer link from lower arm B See: Stabilizer Bar/Stabilizer Link/Service and Repair/Rear Stabilizer Link Removal/Installation.
5. Remove the flange bolt (A) that connects lower arm B to the knuckle.
6. Remove the flange bolt (C) that connects lower arm B to the damper.
7. Lower the floor jack gradually.
8. Remove the spring (A), and the lower spring cushion (C).
9. Mark the cam positions of the adjusting bolt (D) and the adjusting cam (E), then remove the self-locking nut (F), the adjusting cam, and the
