RDX AWD L4-2.3L Turbo (2010)
-
First install all the components and lightly tighten the bolts and nuts, then raise the suspension by loading it with the vehicle's weight before
fully tightening to the specified torque.
-
Check the brake hose and line joint for leaks, and tighten if necessary.
-
Check the brake hose for interference and twisting.
-
Before installing the wheel, clean the mating surfaces on the brake disc/drum and the inside of the wheel.
-
After installation, check for leaks at the line joint, and retighten if necessary. Check the rear wheel alignment, and adjust it if necessary See:
Alignment/Service and Repair.