RDX AWD L4-2.3L Turbo (2010)
13. Remove the bolt securing the shift cable bracket (A).
14. Remove the shift cable grommet (B), and pull out the shift cable (C).
15. Insert a new shift cable through the grommet hole (D), and install the grommet in its hole. Do not bend the shift cable excessively.
16. Secure the shift cable brackets with the bolt and the nuts.
17. Install the heat shield.
18. Make sure that the transmission is in R at the selector control lever.
19. Apply molybdenum grease to the hole in the bushing (A) in the shift cable end (B), then install the shift cable bracket (C) with the nuts.
