RDX AWD L4-2.3L Turbo (2010)
20. Attach the shift cable end to the selector control lever (D), then insert the control pin (E) into the selector control lever hole through the shift cable
end, and secure the control pin with the spring clip (F).
21. Install the shift cable on the shift lever, and adjust the shift cable See: Adjustments.
22. Install the battery base See: Engine, Cooling and Exhaust/Engine/Service and Repair/Engine Installation.
23. Install the air cleaner See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair
.
24. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.