RDX AWD L4-2.3L Turbo (2010)
Shifter A/T: Overhaul
A/T Shift Lever/Shift Cable Bracket Assembly Replacement
A/T Shift Lever/Shift Cable Bracket Assembly Replacement
NOTE:
-
Refer to the Shift Lever Disassembly and Reassembly See: A/T Shift Lever Disassembly/Reassembly as needed during the following procedures.
-
Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands
or gloves.
-
Do not wipe off the grease that is applied to the portion of the shift lever marked with an asterisk (*) when you disassemble or assemble it because
a special grease is used.
1. Remove the shift lever See: Removal and Replacement/A/T Shift Lever Removal.
2. Grasp the shift lever boot ring, and slip it out of the shift lever knob cover.
3. Remove the shift lever button ring (A).