RDX AWD L4-2.3L Turbo (2010)
Shifter A/T: Removal and Replacement
Paddle Shifter + (Upshift Switch) or Paddle Shifter - (Downshift Switch) Replacement
Paddle Shifter + (Upshift Switch) or Paddle Shifter - (Downshift Switch) Replacement
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair in
the SRS before doing repair or service.
1. Remove the steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal and Replacement/Steering Wheel
Removal.
2. Remove the four screws (A) securing the steering wheel rear cover (B), then remove the steering wheel rear cover.
3. Disconnect the paddle shifter + (upshift switch) or paddle shifter - (downshift switch) connector. Remove the screws (A) securing the paddle
shifter + (B) or paddle shifter - (C), then remove the paddle shifter + or paddle shifter -.
4. Install a new paddle shifter + or a new paddle shifter - on the steering wheel.
5. Connect the paddle shifter + or paddle shifter - connector securely, and install the connector in the connector holder.
6. Install the steering wheel rear cover with the screws.