RDX AWD L4-2.3L Turbo (2010)
Is there continuity?
YES -
Repair short to body ground in the wire between cable reel 20P connector terminal No. 16 and PCM connector terminal B16.
NO -
Go to step 8.
8. Turn the ignition switch to ON (II), and shift to S.
9. Measure the voltage between cable reel 20P connector terminals No. 5 and No. 16.
Is there battery voltage?
YES -
Replace the cable reel See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair.
NO -
Go to step 10.
10. Turn the ignition switch to LOCK (0).
11. Jump the SCS line with the HDS.
12. Disconnect PCM connector B (44P).
