acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Paddle Shifter + (Upshift Switch) Circuit Troubleshooting|Page 3058 > < Paddle Shifter + (Upshift Switch) Circuit Troubleshooting|Page 3056
Page 2
background image

Is there continuity while pressing the paddle shifter - (downshift switch) and no continuity when the paddle shifter - (downshift switch) is released?

YES -

Replace the cable reel subharness. 

NO -

Replace the paddle shifter - (downshift switch)  See: Service and Repair/Removal and Replacement/Paddle Shifter + (Upshift Switch) or Paddle Shifter -
(Downshift Switch) Replacement. 

5. Remove the cable reel  See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair.

6. Check for continuity between cable reel 20P connector terminal No. 5 and body ground.

Is there continuity?

YES -

Go to step 7.

NO -

Repair open in the wire between cable reel20P connector terminal No. 5 and ground (G502), or repair poor ground (G502). 

7. Check for continuity between cable reel 20P connector terminal No. 17 and body ground.

Paddle Shifter + (Upshift Switch) Circuit Troubleshooting|Page 3058 > < Paddle Shifter + (Upshift Switch) Circuit Troubleshooting|Page 3056