RDX AWD L4-2.3L Turbo (2010)
21. Close the hook portion of the band with commercially available boot band pliers (A), then hook the tabs (B) of the band.
22. Repeat steps 20 and 21 for the band on the other end of the boot.
Outboard Joint Side
1. Wrap the splines on the driveshaft with vinyl tape (A) to prevent damaging the outboard boot.
2. Install new ear clamp bands (B) and the outboard boot onto the driveshaft, then remove the vinyl tape. Be careful not to damage the outboard boot.