RDX AWD L4-2.3L Turbo (2010)
Axle Shaft Assembly: Overhaul
Intermediate Shaft Disassembly
Intermediate Shaft Disassembly
Special Tools Required
-
Oil Seal Driver, 44.5 mm 07947-SB00100
-
Half Shaft Base 07NAF-SR30101
1. Remove the outer seal (A) and the external snap ring (B) from the intermediate shaft (C).
2. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using a press. Be careful not to damage the bearing support ring (C) on
the intermediate shaft during disassembly.
3. Remove the internal snap ring (A) from the bearing support (B).
