RDX AWD L4-2.3L Turbo (2010)
15. Remove the rear window.
16. Apply a light coat of glass primer to the rear window (A) along the edge of the rubber dams (B) as shown, then lightly wipe it off with gauze or
cheesecloth:
-
Do not apply body primer to the rear window, and do not mix up the body primer applicator and the glass primer applicator.
-
Never touch the primed surfaces with your hands. If you do, the adhesive may not bond to the rear window properly, causing a leak after the
rear window is installed.
-
Keep water, dust, and abrasive materials away from the primed surface.
17. Carefully apply a light coat of body primer to any exposed paint or metal around the flange where the new adhesive will be applied. Let the body
primer dry for at least 10 minutes:
