RDX AWD L4-2.3L Turbo (2010)
-
Do not apply body primer to any remaining original adhesive on the flange.
-
Be careful not to mix up the body primer applicator and the glass primer applicator.
-
Never touch the primed surfaces with your hands.
18. Cut a "V" in the end of the nozzle (A) on the adhesive cartridge as shown.
19. Put the cartridge in a caulking gun, and run a continuous bead of the adhesive (A) to the rear window (B) along the edge of the rubber dams (C) as
shown.
Apply the adhesive within 30 minutes after applying the glass primer. Make a slightly thicker bead at each corner.