RDX AWD L4-2.3L Turbo (2010)
15. Put the cartridge in a caulking gun, and run a continuous bead of the adhesive (A) to the quarter glass (B) along the seals (C) as shown. With the
printed dots on the quarter glass as a guide, apply the adhesive to the upper and lower corner portions of the quarter glass. Apply the adhesive
within 30 minutes after applying the glass primer. Make a slightly thicker bead at each corner.
16. Hold the quarter glass (A) with suction cups (B) over the opening, align it with the clips (C) and set it down on the adhesive. Lightly push on the
quarter glass until its edges are fully seated on the adhesive all the way around.
NOTE: Do not open or close any of the doors for about an hour until the adhesive is dry.