RDX AWD L4-2.3L Turbo (2010)
17. Remove the excess adhesive with a putty knife or a shop towel dampened with isopropyl alcohol.
18. Wait at least an hour for the adhesive to dry, then spray water over the quarter glass and check for leaks. Mark the leaking areas, and let the quarter
glass dry, then seal with sealant. Let the vehicle stand for at least 4 hours after quarter glass installation. If the vehicle has to be used within the
first 4 hours, it must be driven slowly.
19. Reinstall all removed parts.
NOTE: Advise the client not to do the following things for 2 to 3 days:
-
Slam the doors with all the windows rolled up.
-
Twist the body excessively (such as when going in and out of driveways at an angle or driving over rough, uneven roads).
