RL V6-3.5L (2007)
5. Press and release the TALK button, and say what the phone name will be. For example, say "John's phone". You'll hear "John's phone has been
successfully paired", returning to the main menu.
6. To pair another phone, repeat steps 1. thru 5.
Self-diagnostic Function
NOTE: This procedure should be used only if HDS is unavailable. To run the self-diagnostic function, do the following:
1. Turn the ignition switch ACC (I).
2. Press and hold the HFL BACK button for more than 5 seconds.
3. When the HandsFreeLink system enters the self-diagnostic function, the following will occur.
-
If the system has not completed testing for DTCs, the HandsFreeLink control unit audibly outputs "The hands free system test is in progress".
-
If there is no DTC, the HandsFreeLink control unit audibly outputs "The hands free system is OK".
-
If there is any DTC, the HandsFreeLink control unit audibly outputs "The hands free system needs to be serviced".
NOTE:
-
The self-diagnostic function can only be initiated while the HFL is in its idle state.
-
The self-diagnostic function is considered to start once the 5 seconds press and hold is detected, and ends when the units returns to idle state.
