RL V6-3.5L (2007)
3. With the help of an assistant, pull the wheel arch portion away from the side spacer (A), while pulling the rear bumper (B) to release the bumper
from the hooks C) on the side bracket (D).
4. With the help of an assistant, pull the rear bumper (A) to release the bumper from the hooks (B) on both upper brackets (C).
5. Release the hooks, then remove the rear bumper absorber (A).
6. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the rear bumper engages the hooks (of both upper bracket, side bracket, and side spacers) on each side securely.
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips and hooks into place securely.
