RL V6-3.5L (2007)
Front Door Exterior Handle: Service and Repair
Front Door Outer Handle Replacement
NOTE: Put on gloves to protect your hands.
1. Raise the glass fully.
2. Remove the door panel.
3. Disconnect the latch actuator connector, then remove the plastic cover as needed.
4. Pull the glass run channel (A) away as needed, and remove the bolt, then remove the center lower channel (B) by pulling it downward.
5. Remove the access cap (A). Using a clip remover, disconnect the outer handle rod (B) from the outer handle.
6. Replace the bushing (C) with a new one on the outer handle.
NOTE: Do not reuse the bushing when you disconnect the outer handle rod.
