RL V6-3.5L (2007)
NOTE: Do not reuse the bushing when you disconnect the outer handle rod.
5. While holding the outer handle cover (B) from outside of the door, loosen the bolt, and then release the hooks (C) of the outer handle cover, then
remove the cover and the outer handle holder from the outer handle base (D).
6. Pull the outer handle (A) out, and back as shown to remove it from the door. Take care not to scratch the door.
7. Release the hooks (A, B, C), then remove the outer handle front seal (D) and the outer handle rear seal (E).